ES

El First 27 SE pone la vanguardia de las regatas oceánicas en manos de los navegantes de recreo: el rendimiento, la tecnología, la comunidad y, por supuesto, la emoción. Su casco, diseñado por Samual Manuard, ofrece una experiencia de navegación extraordinaria para todo tipo de condiciones meteorológicas.

EN

The First 27 SE brings the cutting edge of offshore racing into the hands of recreational sailors – the performance, the technology, the community, and of course, the exhilaration. As an all-weather, one-design offshore racer, her Samual Manuard-designed hull delivers an extraordinary sailing experience.

DE

Die First 27 SE bringt die Spitzenleistung des Offshore-Rennsports in die Hände von Freizeitseglern - die Leistung, die Technologie, die Gemeinschaft und natürlich die Begeisterung. Als Allwetter-Offshore-Racer mit einem Design bietet ihr von Samual Manuard entworfener Rumpf ein außergewöhnliches Segelerlebnis.

CONSTRUCTION:

• Hull and deck made of vacuum-infused vinylester resin, foam and
  Soric GRP sandwich with unidirectional and biaxial laminates.
• The hull is reinforced with FRP stringers in the keel area and the bow is reinforced.
• Hull and deck sprayed in a single off-white color
• Deck with a strong molded non-slip layer
• Carbon fiber beams laminated to the keel box and glued to the deck
  carbon fiber beams to support the compression of the mast and the hydraulic keel hydraulic cylinder
• Two crossbeams with balanced rudders, built with FRP foam sandwich
• Red chain plates bolted to the main bulkhead
• The bolts, screws, and fittings are all marine-grade stainless steel
  marine-grade stainless steel

ROTATING KEEL SYSTEM:

• Rotating keel with lead bulb "elephant foot", main structural element of steel and epoxy GRP casing
• The laminated areas of the keel are pre-painted with epoxy primer to facilitate anti-fouling treatment
• Manual hydraulic pump with stainless steel hydraulic cylinder on the carbon fiber mast support

DECK EQUIPMENT:

• Stainless steel pulpit 60 cm high, pushpit and six stanchions in matte black, with double lifeline
• Stainless steel bow and stern mooring cleats
• Stainless steel chain plates for side shrouds and forestay, painted in matte red
• Four Wichard folding padeyes for lifting straps at the two central stations
• 2 Harken STA15 secondary halyard winches and 2 Harken STA20 headsail and gennaker trim winches
• 2 Spinlock winches on the coachroof
• Two bags for lines and two bags for winch handles, brand Outils
• Wider mainsail car, installed on the rudder shaft
• Carbon rudder with Spinlock EA1200DS rudder extension
• Tempered laminated glass windows on both sides of the hull
• One opening hatch of 58 cm x 58 cm / 23 x 23" for light
• ventilation and access to the deck in the center area of the boat
• One opening hatch of 25.5 cm x 25.5 cm / 10 x 10" for ventilation of the forward cabin
• Forward anchor well with Dyneema J3 sail anchoring point on deck
• Storage compartment cover at the stern
• Outboard well compartment with two upper and one lower cover and support for combustion outboard motor
• Manual bilge pump operated from the cockpit

MAST AND RIGGING:

• Mast and boom CompoTech with two sets of swept-back spreaders made of
  high-quality carbon fiber
• Ronstan Series 19 aluminum track for mainsail cars
• All carbon parts are UV protected
• Mast transport and storage bag
• Continuous standing rigging 1x19 with
• turnbuckle adjusters
• Retractable carbon bowsprit controlled from the cockpit
• Dyneema boom control line
• Dyneema gennaker sheet
• Dyneema mainsail halyard 2:1 with Wichard MX8 halyard shackle
• Dyneema headsail halyard
• Dyneema stay halyard 2:1
• Dyneema mast gennaker halyard
• Dyneema fractional gennaker halyard
• 9x Spinlock attachments for halyards, mainsail reefs, and bowsprit control lines
• Ronstan blocks and cleats for mainsail, headsail, and gennaker lines
• A conical mainsail sheet with low-friction ball bearing blocks
• Three mainsail reefing lines
• Mainsail car control system
• 8:1 purchase line for the sheet clew on the boom
• Cunningham 8:1 pulley block
• 16:1 boom sheet pulley
• Three headsail sheets
• Fixed-length spliced Dyneema headsail halyards
• 2:1 headsail halyard sheets with control lines, cleats, and blocks
• Two conical gennaker sheets with pulleys
• Mast transport and storage bag

ELECTRICITY:

• Custom electric control panel with five switches and
  Philippi LCD smart battery control display
• Main switch with remote control on the control panel
• Standard 12 V and USB sockets in the salon
• 12 V AGM battery with 70 AH
• Indirect LED ambient lighting in the ceiling
• One central LED light and two LED lights in the forward cabin
• Navigational and anchor LED light at the top of the mast
• Sentinel Tracker to connect, monitor, and control the vessel's systems remotely through your mobile phone with a 1-year subscription
• Pre-wired for most available electrical options

INTERIOR:

• The bulkheads and furniture are lightly coated with a matte top color and white gelcoat on the moldings for a light, clean, and easy-to-clean finish.

Forward cabin:

• Double V berth
• Opening hatch of 25.5 cm x 25.5 cm / 10 x 10" for ventilation of the forward cabin

Central compartment / wet room:

• One opening hatch of 58 cm x 58 cm / 23 x 23" for light
• ventilation and access to the deck of the central compartment
• Base for the chemical or flush toilet with monolithic reinforcements for the valves reinforcements 

Salon:

• Bright and spacious salon with large plexiglass sink and sliding hatch in the companionway
• Special space to store the washboard behind the steps of the companionway
• Benches on both sides of the salon, divided into four wooden lids for the lower storage space
• Main power box and battery in the port aft compartment and
  Keel hydraulic pump under the starboard aft compartment
• Upholstered backs with attachment points for gimbal stoves on both sides and kitchens on both sides and storage space behind the nets
• Spacious berths on both sides at the stern, with watertight compartments underneath
• Front and rear covers of the keel box with table attachment point
  with a screw at the stern
• Electrical boxes under the ceiling and under the stairs
• Additional storage space under the stairs and the engine box for
  the fresh water tank or other systems, with cover
• Two ergonomic wooden steps on the stairs
• Well-insulated 40-liter refrigerator under the lower steps of the stairs, with
  Option to upgrade the refrigerator compressor
• Light gray EVA foam floorboards
• Red matte painted shroud attachment plates

9.9 HP MERCURY OUTBOARD MOTOR WITH ELECTRIC START:

• Mercury 9.9 HP outboard motor (short shaft, remote control,
  electronic start), integrated into the engine compartment of the cockpit
• Remote control for throttle and gearbox with Teleflex controls, removable
• Spinlock handle and push-pull cables
• Electronic start motor with key
• 6 A alternator to charge the battery
• Custom installation parts (rubber foot motor support,
  padding of the storage compartment)
• Standard 12-liter Mercury fuel tank with connection hose
• Straps with attachment points to secure the fuel tank
• Complete installation and electrical wiring

FIRST 27 SE FACNOR FLAT DECK FURLER FOR THE HEADSAIL
(FD110):

• Facnor FD110 flat deck furler with flat aluminum profile
• Spinlock coupling to furl the headsail line on the side of the cockpit
• Custom stay attachment

BARTON RODKICKER/TREEKICKER:

• Barton composite boom support
• Prevents the boom from falling into the cockpit or on the car roof
• Reinforcement of the boom and mast foot

ADJUSTABLE HEADSAIL FURLER:

• Adjustable headsail furler for precise 3D trimming of the headsail
• 6:1 pulley on the roof of the carriage
• Replaces the standard fixed-length headsail furler and allows for active adjustment of the headsail sheet angle

FIRST 27 SE NORTH SAILS MAINSAIL:

• Square mainsail with full battens and three reefs
• Durable and robust NPL Tour laminate in light gray, tri-radial cut
  cut, 26.2 m2 / 282 square feet
• Batten car system with Ronstan Series 19 ball bearing for aluminum mast track

FIRST 27 SE NORTH SAILS ROLLER FURLING HEADSAIL J1:

• J1 roller furling headsail with vertical battens for Facnor FD110
• Durable and robust NPL Tour laminate in light gray, tri-radial cut 19.5 m2 / 210 square feet

FIRST 27 SE NORTH SAILS ROLLER FURLING HEADSAIL J3 WITH ROLLING REEF:

• J3 roller furling headsail with structural luff, hoisted on a special 2:1
  halyard
• Tri-radial cut, Hydranet material
• Facnor FX 1500+ furler set with spliced continuous furler line
• Wichard MX6 halyard shackle

FIRST 27 SE NORTH SAILS A5 FRACTIONAL GENNAKER IN A
COLOR OF YOUR CHOICE:

• Fractional gennaker, snuffer, 64 m2 / 689 square feet
• Nylite 90 - high-performance ripstop nylon, 1.12 oz.
• Color options - RED, WHITE, or BLACK

UPGRADE TO ELECTRIC PUMP FOR THE KEEL HYDRAULIC SYSTEM:

• Upgrade the standard manual hydraulic system with a
  12 V electric pump
• Double safety control switches on the electric control panel
• Manual operation capability of the keel

KOMPASS PLASTIMO CONTEST 101:

• Plastimo Contest 101 compass mounted on the bulkhead next to the companionway
  mounted
• Light compass connected to the switch for navigation navigation light switch

SOLAR PACK

WINDEX

GARMIN COASTAL PACKAGE:

• GMI 20 large and bright QVGA color displays of 4" with LED backlighting, installed on the ceiling of the locker
• Airmar DST810 transducer for depth, speed, and temperature
• Wind sensor with gWind Regatta cable
• External GPS antenna 24xd
• NMEA2000 trunk network kit and wiring
• Dedicated switch on the control panel

GARMIN AUTOPILOT PACKAGE:

• Under-deck autopilot installation, ready for immediate use
• Reactor™ 40 course computer unit with 10 ECU package
• Autopilot operation and control instrument GHC 50
• Remote control for the Reactor™ autopilot
• GRF 10 rudder feedback sensor
• Raymarine mechanical linear actuator, type 1
• Wiring, installation cable, quadrant arm, and other mounting hardware
• Dedicated switch for the autopilot on the control panel

GARMIN PLOTTER PACKAGE:

• GPSMAP 723 touchscreen chartplotter with high-resolution IPS display
• Supplied with world base map, NO detailed charts of the region
• Garmin Sailassist navigation functions
• Installed on a special swivel mount in the companionway
  with adjustable angles for perfect visibility, also for indoor use 
• Special wiring and switch from the control panel

GARMIN VHF 215I MARINE RADIO WITH AIS:

• Garmin VHF 215i AIS marine radio with standard digital selective calling
  Digital Selective Calling (DSC) class D functionality
• Garmin AIS 800 black box transceiver, including VHF antenna splitter for Class B AIS system
• External GPS/GLONASS GA 38 antenna
• SCOUT KM-10S fiber optic VHF antenna
• Special wiring and switch from the control panel

230 V CHARGING PACKAGE:

• 230 V charger with fuse
• External ground cable plug
• Ground connection cable + adapter to standard 230 V plug
• Internal 230V plug

GIMBAL STOVE

CLASSIC TOILET:

• ABS plastic bowl (only 3 kg) from RM,
• Single 30 L / 7.9-gallon black water tank, installed in the toilet room
• Plumbing with Trudesign valves

FIRST 27 SE COMFORT PACKAGE IN A COLOR OF YOUR CHOICE:

• Upholstery in synthetic leather on the forward V berth and on the salon benches
• A folding wooden table in the keel box
• Two folding magnetic doors to close the toilet compartment in the
  chosen synthetic leather color
• Synthetic leather color options: GRAY and TURQUOISE

FIRST SE CREW BAGS (6 UNITS), IN A COLOR OF YOUR CHOICE:

• FIRST SE water-repellent bags, made of PVC for easy hanging.
  hanging
• Attachment points for four bags in the salon and two in the forward cabin
• FIRST SE handles in red
• Color options - GRAY, WHITE, BLUE, and RED

ANCHORING PACK

LAZY BAG

SUNSHADE

ROLLING HEADSAIL COVER

TRANSPORT & COMMISSIONING

CONSTRUCTION:

• Hull and deck constructed with Vacuum Infusion of Vinyl ester
  resin, foam and Soric GRP sandwich with unidirectional and biaxial
  laminates
• Hull is reinforced with Infused GRP stringers in the keel and bow
  sections
• Hull and deck are moulded in single tone off-white,
• Deck with high traction non-skid moulded
• Carbon fibre beams laminated on keel box and glued to the deck to
  support mast compression and keel hydraulic ram
• Two transoms hung balanced rudders, built of GRP foam sandwich,
• Red chainplates bolted to the main structural bulkhead
• Bolts, screws and fittings are all made of stainless marine grade
  stainless steel
• Faired underwater areas, ready for sanding, epoxy primer and
  antifouling application

SWINGING KEEL SYSTEM:

• Swinging keel with “elephant leg” lead bulb, main steel structural
  element and epoxy GRP enclosure
• Laminated areas of the keel are pre-painted with epoxy primer for
  easier antifouling treatment
• Manually operated hydraulic pump with stainless steel hydraulic ram
  built in the carbon fibre mast support

DECK EQUIPMENT:

• 60 cm high stainless steel pulpit, pushpit and six stanchions painted
  in mat black, with double lifelines
• Stainless steel bow and stern mooring cleats
• Stainless steel chain plates for side shrouds and forestay painted in
  mat red
• Four Wichard folding pad eyes for lifting straps at mid-two stations,
• 2x Harken STA15 secondary halyard winches and 2x Harken STA20
  jib and gennaker trim primary winches
• 2x Spinlock winchfeeder on the coachroof
• Two rope bags and two winch handle bags, Outils Océans & First
  branded
• Wide mainsail traveller, installed over the tiller
• Carbon tiller with Spinlock EA1200DS tiller extension
• Laminated tempered glass windows on both sides of the hull
• An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light
• ventilation and deck access to the mid-section compartment
• An opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front
  cabin ventilation
• Bow anchor locker with Dyneema J3 staysail attachment point on
  the deck
• Stern storage compartment cover
• Foldable outboard cockpit compartment with two top & one bottom
  cover and engine bracket for internal combustion outboard (not
  mounted)
• Manual bilge pump operated from the cockpit

MAST & RIGGING:

• CompoTech mast and boom with two sets of swept-back spreader build in high-quality carbon fibre
• Ronstan Series 19 aluminium track for mainsail cars (cars not included; they are part of the mainsail option)
• All carbon parts UV protected
• Mast transport & storage bag
• Continuous 1x19 standing rigging with
• Bottle screw adjusters
• Retractable carbon bowsprit controlled from the cockpit
• Dyneema pole-out control line
• Dyneema gennaker tackline
• 2:1 Dyneema mainsail halyard with Wichard MX8 halyard shackle
• Dyneema jib halyard
• 2:1 Dyneema staysail halyard
• Dyneema masthead gennaker halyard
• Dyneema fractional gennaker halyard
• 9x Spinlock clutches for halyards, mainsail reefs and bowsprit
  control lines
• Ronstan blocks and cleats for the mainsail, jibs and gennakers
  control lines
• One tapered mainsheet with ball bearing low friction blocks
• Three mainsail reef lines
• Control line for the mainsail traveller
• 8:1 outhaul purchase led inside the boom
• 8:1 cunningham purchase
• 16:1 vang purchase
• Three jib sheets
• Spliced Dyneema jib inhaulers with a fixed length,
• 2:1 jib downhaulers with control lines, cleats and blocks
• Two tapered gennaker sheets with blocks
• Mast transport & storage bag

ELECTRICITY:

• Custom electric control panel with five switches and smart Philippi
  LCD battery control display
• Remotely controlled master switch on the control panel
• Standard 12V and USB plugs in the saloon
• 12V 70AH AGM battery
• Ambiental indirect LED lights around the ceiling
• One mid-section and two front cabin battery LED lights
• Masthead LED navigation and anchor light
• Sentinel tracker to connect, monitor and control boat systems
  remotely on your mobile phone with a 1-year subscription
• Pre-wiring for most of the available electrical options

INTERIOR:

• Bulkheads and furniture lightly covered with mat paint with white
  gel coat on the moulded parts for light, clean and low maintenance
  finish

Front Cabin:

• Double V-berth with insubmersibility volume underneath
• Opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front cabin
  ventilation

Mid-section compartment / Wet room:

• An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light
• ventilation and deck access to the mid-section compartment
• The base for chemical or flush toilette with monolithic
  reinforcements for valves on the starboard side

Saloon:

• Bright and spacious saloon area with large Plexiglass companionway
  washboard and sliding hatch
• Dedicated storage place for washboard back of the companionway
  steps
• Benches on both sides of the saloon, divided into four wooden
  covers of the storage space underneath
• Main electric box and battery in aft port compartment and keel
  hydraulic pump under aft starboard compartment
• Padded back-supports with gimbal cooker holder attachment points
  on both sides and storage behind the nets
• Wide berths in the stern on both sides, with insubmersiblity
  chambers underneath
• Front and aft keel box covers with table attachment point with a
  screw on the aft
• Electric boxes under the ceiling and under the companionway
• Extra storage room under the companionway and engine box for
  fresh-water tank or other systems, with cover
• Two ergonomically shaped wooden companionway steps
• Well insulated 40L icebox below bottom companionway step, with
  fridge compressor upgrade possibility
• Light grey EVA foam floorboards
• Shrouds attachments counter plates painted in mat red

PROPULSION

MERCURY 9,9 HP OUTBOARD ENGINE WITH ELECTRIC
STARTER:

• Mercury 9.9 HP outboard engine (short shaft, remote controls, electric starter), integrated into the cockpit engine compartment
• Throttle and gear remote control system with Teleflex commands, removable Spinlock handle and push-pull cables
• Electric starter with key
• 6 A alternator for charging of the battery
• Custom installation parts (engine foot rubber support, storage position padding)
• Standard Mercury 12 L fuel tank with connection hose 
• Strap with attachment points for fixation of the petrol tank
• Complete installation and electric wiring

SAILS & RIGGING

FIRST 27 SE FACNOR FLATDECK FURLER FOR THE JIB
(FD110):

• Facnor FD110 flatdeck furler with flat aluminium profile
• Spinlock clutch for furling line on the side of the cockpit
• Customised forestay toggle

BARTON RODKICKER/BOOMKICKER:

• Barton composite Boomstrut
• Prevents the boom from dropping into the cockpit or onto the coach roof
• Boom and mast foot reinforcement

ADJUSTABLE JIB INHAULERS:

• Adjustable jib inhauler for precise 3D trim of the jib
• 6:1 purchase on the coachroof
• Replacing standard fix-length jib inhauler and allowing active trim of the jib sheeting angle

FIRST 27 SE NORTH SAILS SQUARE TOP MAINSAIL:

• Square top mainsail with full battens and three reefs
• Durable and robust NPL Tour laminate material in light grey, triradial cut, 26,2 m2 / 282 sq ft
• Ronstan Series 19 Ball-Bearing Batten Car System for aluminium
  mast track

FIRST 27 SE NORTH SAILS J1 JIB FOR FURLER:

• J1 furling jib with vertical battens for Facnor FD110
• Durable and robust NPL Tour laminate material in light grey, triradial
  cut 19,5 m2 / 210 sq ft

FIRST 27 SE NORTH SAILS J3 FURLING STAYSAIL WITH FURLER:

• Furling J3 jib with structural luff to be hoisted on the dedicated 2:1 halyard
• Triradial cut, hydranet material
• Facnor FX 1500+ furler set with spliced continuous furling line
• Wichard MX6 halyard shackle

FIRST 27 SE NORTH SAILS A5 FRACTIONAL GENNAKER IN A
CHOSEN COLOUR:

• Fractional gennaker, reacher, 64 m2 / 689 ft2
• Nylite 90 - Performance Ripstop nylon, 1,12 oz.
• Colour options – RED, WHITE or BLACK

NAVIGATION & ELECTRONICS

ELECTRIC PUMP UPGRADE FOR HYDRAULIC KEEL SYSTEM:

• Upgrade of standard manual hydraulic system with 12V electric pump
• Double safety control switches on the electric panel
• Manual operation of the keel remains possible

COMPASS PLASTIMO CONTEST 101:

• Plastimo Contest 101 compass mounted on bulkhead next to companionway
• Compass light connected to navigation lights switch

SOLAR PACK:

• Sunbeam Tough series walkable 55W solar panel
• Placed on the cabin in front of the mast with connection cable hidden under the panel
• Smart MPPT solar panel regulator for up to 30% better panel efficiency
  and Bluetooth connectivity

WINDEX

GARMIN COASTAL PACK:

• GMI 20 large and bright 4’’ QVGA colour displays with LED backlighting, installed on the coachroof
• Airmar DST810 depth, speed and temperature transducer
• gWind race wired wind transducer
• External GPS 24xd antenna
• NMEA2000 backbone kit and wiring
• Dedicated switch on the control panel

GARMIN AUTOPILOT PACK:

• Underdeck autopilot installation, instantly available for use
• Reactor™ 40 Course Computer Unit with ECU 10 pack
• GHC 50 Autopilot Instrument for operation and control
• Reactor™ Autopilot Remote Control
• GRF 10 Rudder Feedback Sensor
• Raymarine mechanical linear drive, Type 1
• Wiring, installation cables, quadrant arm and other assembly parts
• Dedicated switch for an autopilot on the control panel

GARMIN CHARTPLOTTER PACK:

• GPSMAP 723 touchscreen Chartplotter with high-resolution IPS display
• Supplied with Worldwide Base map, WITHOUT detailed regional charts
• Garmin Sailassist™ sailing features
• Installed on unique swinging bracket at the companionway, with
  adjustable angles for perfect visibility and inside use as well
• Wiring and dedicated control panel switch

GARMIN VHF 215I MARINE RADIO WITH AIS:

• Garmin VHF 215i AIS Marine Radio with standard Class D Digital Selective Calling (DSC) functionality
• Garmin AIS 800 Blackbox Transceiver, including VHF antenna splitter for Class-B AIS system
• External GA 38 GPS/GLONASS antenna
• SCOUT KM-10S VHF Fiberglas Antenna
• Wiring and dedicated control panel switch

230V CHARGING PACK:

• 230V charger with fuse
• External shore cable plug
• Shore cable + adapter to standard 230V plug
• Internal 230V plug

COOKER GIMBAL:

• Aluminium gas cooker gimbal optimised for Jetboil Flash cooker (not
  included)
• Can be fixed on the saloon back-supports on both sides

CLASSIC TOILET:

• ABS plastic bowl (only 3 kg / 6,61 lbs) by RM,
• 30 L / 7.9 gallons unique blackwater tank, installed in the toilet compartment
• Plumbing with Trudesign valves

FIRST 27 SE COMFORT PACK IN A CHOSEN COLOUR:

• Faux leather cushions on the front V-berth and saloon benches
• A foldable wooden table on the keel-box
• Two foldable magnetic doors closing the toilet compartment and Sail
  locker panel in chosen faux leather colour
• Faux leather colour options – GREY and TURQUOISE

FIRST SE CREW BAGS (6 PIECES) IN A CHOSEN COLOUR:

• Water repellent PVC easy-to-hang FIRST SE crew bags,
• Attachment points for four bags in the saloon and two in the front
  cabin
• FIRST SE handles in red
• Colour options – GREY, WHITE, BLUE and RED

MOORING PACK:

• Spade A60 aluminium anchor (4,5 kg / 10 lbs),
• 40 m/12 mm / 131’ 3’’/0,47-inch rope for the anchor with first 10 m
  / 32’ 10’’ with lead insert
• Mooring lines 10m/12mm / 32’ 10’’/0,47 inch with spliced ends, 4x
• Outils Océan Custom square foam fenders with fixation ropes, 4x

LAZY BAG

FURLING JIB COVER

SUNSHADE WITH POLES

TRANSPORT & COMMISSIONING

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.